In this series the analogue and the switching outputs are programmed by teach-in. This is done in a very simple and very accurate way via a teach-in using a built-in pushbutton. This series P44 disposes of an analogue 0-10V / 4-20mA output and two switching outputs.
Series-output |
P44 |
Setting |
Teach-in |
Output |
analogue+switching |
Stroke(mm) |
3500/2000/1500/350 |
Blind(mm) |
350/250/150/60 |
Beam angle |
8° |
Repeatability(%) |
0.2 |
Interface |
/ |
Analogue output |
0-10V/4-20mA |
Respones time(ms) |
500/300/200 |
Linearity(%) |
0.5 |
Resolution(mm) |
1 |
Switching output |
2 PNP/NPN |
Output current(mA) |
100 |
Switching frequency(Hz) |
1/8 |
Hysteresis |
1% |
Work voltage(V) |
18-30 |
Work current(mA) |
45 |
Housing material |
Plastic |
IP |
67 |