The series P47 sensors with analogue or switching outputs were developed for accurate measurements and simplest mounting on the site. The analogue outputs 0-10V and 4-20mA are fixed. If a sensor is replaced, then the control system can be restarted immediately without any readjustment. The set points of the switching sensors can be easily adjusted with the easily accessible large potentiometer. Each sensor has an analogue or a switching output.
|
Series-output |
P47-analogue |
P47-switching |
|
Setting |
Basis |
|
Stroke（mm） |
5000/2500/1500/600/300 |
|
Blind（mm） |
500/300/200/100/60 |
|
Beam angle |
8° |
|
Repeatability（%） |
0.2 |
|
Analogue output |
0-10V/4-20mA |
/ |
|
Switching output |
/ |
1 PNP/NPN |
|
Respones time（ms） |
400/200/120/60 |
/ |
|
Output current（mA） |
/ |
500 |
|
Linearity（%） |
<0.3 |
/ |
|
Switching frequency（Hz） |
/ |
5/10/20 |
|
Resolution（mm） |
1.1/0.3 |
/ |
|
Hysteresis |
/ |
2% |
|
Work voltage（V） |
18-30 |
|
Work current（mA） |
35 |
|
Housing material |
Plastic |
|
IP |
67 |
