The  GECITECH smooth bore  PTFE  hose is  the perfect solution for the transfer of chemical products,
solvents, steam both at high temperature and pressure. 
 
It is also recommended for the transfer of Hot Melt glue, paints, gas, hydrocarbons. 
The non-stick quality of the PTFE allows a good flow of the conveyed liquids, and with a minimum pressure
loss
 
PTFE remains inert to the products conveyed in the hoses.
The PTFE stainless steel braid hose can be equipped with GECITECH 316L stainless steel fittings. 
 
All kinds of fittings available: GAZ, NPT, DIN2353, etc…
The PTFE hose must not be used with fluorine gas or alkaline metals. 
Temperature of use: from -50° to +200°C, with peaks up to 230 °C
Maximum admissible steam pressure: 14 bar.