Series MDJ                 

Assembly consisting of a stainless steel pressure container with a capacity of 10 litres with a support for wall mounting and valve assembly with a maintenance unit. At the maintenance unit is connected the unfiltered and non-lubricated air power (6 - 9 bar). The spray air pressure is set with the pressure regulator with a manometer. We recommend a low spray air pressure of 0.5 to max. 2.5bars. By the solenoid valves 24V DC in air and fluid pipes is a mounting of the valve and container groups up to max. 1000 mm of upper as also underneath the spray heads possible. That means with the use of multiple spray heads these can be arranged in different levels to each other and/or to the valve and container group constructions.

Over a fine pressure regulator the fluid pressure is set. This must always be at least 0.5Bar below the spray air pressure.

The valves are not subjected closed. Through the joint opening of the valves enter spray air and liquid to the spray head. Spray beginning, spraying and spraying duration will be determined by the control of the valves from the customer´s control.

MDJ- equipment with different connection possibilities

MDJ-1fold_standard

Stationary valve and container groups for operating max. 1 spray head with a maximum of 6 spray nozzles (for example PSM 6-fold). Suitable for all liquids, except paints, resins and adhesives, which reach a maximum viscosity of 2300 mm²/s at 20°C and 500 mm²/s at 40°C.

MDJ-1fold-1Z-EL standard

MDJ-3folds_standard

Stationary valve and container groups for joint operation of max. 3 spray heads with a maximum of 6 spray nozzles (for example PCJ 2 fold spray heads = 2 spray nozzles, PTR spray head = 1 spray nozzle). Specifications such as MDJ 1-fold, electrical control over each 1 air and fluid valve with 24V DC.

MDJ-3folds-1Z-EL standard

MDJ-6folds_standard

Stationary valve and container groups for joint operation of max. 6 spray heads with a maximum of 6 spray nozzles (for example PCJ 2 fold spray heads = 2 spray nozzles, PTR spray head = 1 spray nozzle). Specifications such as MDJ 1-fold, electrical control over each 1 air and fluid valve with 24V DC.

MDJ-6folds-1Z-EL standard

For an optimal operation we recommend our spray heads / spray bars, which can individually be adapted to your application. If desired, you can define your spray units yourself on the configurator. The HPM Technologie also offers suitable spray Medias.